To save a trace waveform
1
Press
Trace
.
2
Press the
Trace
softkey to choose either
Mem1
or
Mem2
.
Mem1
and
Mem2
correspond to the two pixel memories where you can save the
waveform.
3
Press
Save to Mem
to save the currently displayed waveform.
Save to Mem
will appear as either
Save to Mem1
or
Save to Mem2
,
depending on the pixel memory you selected in step 2.
The analyzer saves the current trace waveform display and the instrument
setup in the selected memory.
Making Analyzer Measurements
To save a trace waveform
114
To Next Page
Loading...
