HP 54620A User Manual

In This Book
The
HP 54620A/C User and Service Guide
is your guide to using the
features of the Logic Analyzer in the design and troubleshooting of digital
system circuitry.
Chapter 1
, “Getting Started,” explains how to set up the analyzer and make
basic measurements. It also gives an overview of basic analyzer operational
concepts including use and interpretation of the front panel and display.
Chapter 2
, “Making Analyzer Measurements,” shows you how to use the
instrument configuration features, measure waveform data, control data
acquisition, examine captured data in more detail, set up analyzer trigger
conditions, and shows how to use the analyzer with other instruments.
Chapter 3
, “Solving Problems,” shows you how to fix the most common
kinds of problems that might occur when you begin operating the analyzer.
Chapter 4
, “Ensuring Accurate Measurements,” explains the relationships
between the analyzer time base and other time-dependent functions,
discusses the effect of probes on measurement accuracy, and explains the
glitch detection system. After you have made a few measurements with the
HP 54620A/C, it is a good idea to read this chapter.
Chapter 5
, “Testing, Adjusting, and Troubleshooting the Logic Analyzer,”
explains how to test the HP 54620A/C to ensure that it operates correctly.
The chapter also shows how adjust and troubleshoot the analyzer.
Chapter 6
, “Replaceable Parts,” explains how to remove and replace the
various assemblies in the analyzer. The chapter also lists the replaceable
parts for the analyzer and gives ordering information.
Chapter 7
, “Performance Characteristics,” lists the measurement
performance standards to which the instrument is tested.
Chapter 8
, “Messages,” lists the status and error messages that may be
displayed by the analyzer, explains their causes, and tells what to do to
correct the problem.
If you want to automate HP 54620A/C measurements using a programmable
controller such as an IBM-compatible PC or an HP 9000 Series 700 controller,
see the
HP 54620A/C Programmer’s Guide
and the
HP 54620A/C
Programmer’s Reference
. The
Programmer’s Reference
is supplied as a
help file on a 3.5" diskette. The diskette includes a help file viewer for
Microsoft Windows 3.1, and Microsoft Write editor versions of the files. ASCII
files are also supplied.
4

HP 54620A Specifications

General

Brand	HP
Model	54620A
Category	Measuring Instruments
Language	English