Table 25 General Characteristics for HP 54620A Only
These general characteristics apply to the HP 54620A only.
Environmental
Characteristics
Meets the requirements of MIL-T-28800E for Type III, Class 3, Style D
equipment as described below.
Ambient
Temperature
Operating: –10°C to +55°C.
Non-operating: –51°C to +71°C.
Humidity
1
Operating: 95% RH at 40°C for 24 h.
Non-operating: 90% RH at 65°C for 24 h.
Altitude Operating: To 4,570 m (15,000 ft).
Non-operating: To 4,570 m (15,000 ft).
Vibration Operating 15 min along each of the three major
axes; 0.025-in peak-to-peak displacement, 10 Hz
to 55 Hz in 1-minute cycles. Held at 10 min at 55 Hz
(4 g at 55 Hz).
Shock Operating 30 g, 1/2 sine, 11-ms duration.
3 shocks/axis along major axis. Total of 18 shocks.
EMI, Military MIL-T-28800E Meets the requirements in accordance with
MIL-T-28800 paragraph 3.8.3 table IX, and
MIL-STD-461C.
CE01 Part 2.
CE03 Part 2.
CS01 Part 2.
CS02 Part 2 (limited to 100 MHz).
CS06 Part 5.
RE01 Part 5 measured at 6 inches, 15 dB relaxation to
20 kHz; exceptioned from 19 kHz to 50 kHz.
RE02 Part 2 (limited to 1GHz) full limits of class A1C and
A1F with option 002 installed. Without option 002
installed, 10 dB relaxation from 10 kHz to 100 kHz.
RS03 Part 2, limited to 3 V/meter from 14 kHz to 1 GHz
(with option 001 installed); slight trace shift from
80 MHz to 200 MHz..
1
Tested to Hewlett Packard environmental specification section 758 for class B-1 products.
Performance Characteristics
204
To Next Page
Loading...
