To assign a label to a channel
1
Press
Label
.
2
Press the
Define Labels
softkey.
The following figure shows the label maker. A label definition menu is shown
on the right-hand side of the display.
3
Select the channel for which you want to assign a label using the
Select knob.
You can assign labels to channels that are off and to channels that are on.
4
Use the Entry knob to choose the label you want to assign from the
list of labels.
The Entry knob moves the cursor through the label list, then through the
character list. You can also define custom labels. The label list includes all
predefined labels, and custom labels you have defined, unless it is
re-initialized. See “To define a new label.”
5
Press the
Copy
softkey.
The selected label is transferred to the entry field.
6
Press the
Assign Label
softkey.
The label is assigned to the selected channel.
Label display is automatically enabled when you enter the Define Labels
menu. Thus, if the labels were off, they are turned on while you define labels.
If you exit the Define Labels menu, and the labels were off before you
entered the menu, they are turned off when you exit.
Making Analyzer Measurements
To assign a label to a channel
60
To Next Page
Loading...
Need help?
General
