Table 38 Error codes (part code 3305) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the setting.The number of volumes with System Disk
setting exceeds the maximum number of
volumes defined as System Disk volume.
656513305
WCheck the setting.There are no changes in the current
configuration and the setting.
656613305
WDelete the Thin Provisioning Pool Group
that includes the items to be maintained.
The volumes registered in a Thin
Provisioning Pool Group are included in
the items to be maintained.
656703305
WRelease the association between the pool
volume and the Thin Provisioning volume.
The pool volumes associated with the
Thin Provisioning volume is included in
the items to be maintained.
656713305
WCheck the status and wait until the status
changes to a status that maintenance is
possible.
Preparing for quick format.656913305
WCheck the specified volume.The specified volume is not available to
execute VLL operation (Create LDEVs,
Delete LDEVs).
657283305
WCheck the specified volume, and retry
the operation.
The system disk cannot be set on the
specified volume.
657303305
WCheck if the configuration changing
process by RAID Manager, Auto LUN,
or Quick Restore is not in the operation,
then retry the operation.
The configuration changing processes
are conflicting at DKC.
657403305
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
657413305
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
657423305
WWait for a while, then click [Refresh] on
the [File] menu. When an error occurs
during login, wait for a while and login
again.
The disk subsystem is in internal process,
or some other user is changing the
configuration.
657683305
WCheck the specified volume.The specified volume contains a quorum
disk.
657813305
WCheck the specified volume.The specified volume includes a remote
command device being used by a mirror
of the journal group.
657903305
WSet the Audit Log buffer function to
"Disable," then retry the operation.
The specified volume includes a system
disk being used by the audit log.
688023305
WCheck the specified MP Blade.The specified MP Blade is not mounted.780323305
WRelease the Fixed attribute, or specify a
mounted Processor Blade.
AUTO cannot be specified because the
Fixed attribute has been added to all of
the Processor Blades.
780333305
Part code 3305 105
To Next Page
Loading...
Need help?
General