Part code 0010
Table 8 Error codes (part code 0010)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EPlease contact HP Technical Support.An error occurred during the process. If
this problem persists, please contact HP
Technical Support.
60230010
EYou cannot connect to the SVP because
of factors, such as a network error or
SVP error. Check the IP address. If the
IP address is correct, close the browser
(also close the browser of the storage
list), and log in again after waiting a
while. If the problem persists, please
contact HP Technical Support.
The version of Remote Web Console may
not match the version of destination SVP.
Clear the cache of JRE and the browser.
Restart the browser, and then retry the
processing. The Remote Web Console
is downloaded via the network and then
executed. If you use a proxy server, the
old version of the program may remain
in the cache of the proxy, and may be
downloaded and executed. If this
problem persists, contact your network
administrator. If your network does not
have any problem, and this problem
persists, please contact HP Technical
Support.
A network error occurred. The probable
causes are:
• The SVP was not ready.
• An error occurred in the SVP.
• A timeout error occurred during
communication with the SVP.
60270010
EYou cannot connect to the SVP because
of factors, such as a network error or
SVP error. Check the IP address. If the
IP address is correct, close the browser
(also close the browser of the storage
list), and log in again after waiting a
while. If the problem persists, please
contact HP Technical Support.
An error occurred while connecting to
the SVP.
60700010
EPlease contact HP Technical Support.An error occurred while writing to a file.60940010
EDelete the cache file of the browser,
restart the browser and log-on again.
If this problem persists please contact HP
Technical Support.
An error occurred in the client logic.70600010
EIf this problem persists, please contact
HP Technical Support.
An error occurred during processing. If
this problem persists, please contact HP
Technical Support.
74400010
WClick [Refresh], and retry the operation.The system cannot apply the new
configuration. Do you want to refresh?
81010010
WDownload the audit log file.The capacity for storing the audit log file
is running out.
93760010
WSpecify the existing file.The specified file does not exist.550050010
ECheck the file status.An error occurred during file reading.560000010
22 Message (part code group 0nnn)
To Next Page
Loading...
Need help?
General