HP StorageWorks P9000 - Disk Arrays User Manual

Table 62 Error codes (part code 7105) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WExternal Storage volume cannot be used
as a T-VOL. Specify another volume.
The SI Operation for FICON(R) Data
Migration failed, because the T-VOL of
the specified pair was used by External
Storage.
687747105
WThe specified operation cannot be
executed in the current pair
configuration. Specify volumes other than
FICON(R) Data Migration Source Volume
for S-VOL, and then retry the operation.
The command has been rejected,
because the S-VOL of the specified pair
is a FICON(R) Data Migration Source
Volume.
687757105
WThe specified operation cannot be
executed in the current pair
configuration. Specify volumes other than
FICON(R) Data Migration source volume
for T-VOL, and then retry the operation.
The command has been rejected,
because the T-VOL of the specified pair
is a FICON(R) Data Migration Source
Volume.
687767105
WThe specified operation cannot be
executed to FICON(R) Data Migration
source volume. Specify a volume other
than FICON(R) Data Migration source
volume, and then retry the operation.
The command has been rejected,
because the specified volume is a
FICON(R) Data Migration Source
Volume.
687777105
WDelete the Continuous Access
Synchronous pair or Continuous Access
Journal pair that is using Thin
Provisioning volumes, then retry the
operation.
The initialize function cannot be
executed, because a Continuous Access
Synchronous pair or a Continuous
Access Journal pair is created by using
Thin Provisioning volumes.
688147105
WUse another CTG, or release the pair of
Snapshot where the specified CTG is in
use.
The command has been rejected,
because the specified CTG is used by
Snapshot.
688327105
WUse another CTG, or release the pair of
Business Copy Z where the specified
CTG is in use.
The command has been rejected,
because the specified CTG is used by
Business Copy Z.
688337105
WUse another CTG, or release the pair of
Business Copy where the specified CTG
is in use.
The command has been rejected,
because the specified CTG is used by
Business Copy.
688347105
WSpecify the volume not used as S-VOL of
SI Operation for Mainframe Fibre Data
Migration, or retry the operation after
deleting the current pair.
The SI Operation for FICON(R) Data
Migration failed, because more than one
T-VOL was assigned for the specified
S-VOL.
688547105
Part code 7110
Table 63 Error codes (part code 7110)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the capacity of S-VOL and T-VOL.
Specify a volume with the same capacity,
and retry the operation.
The T-VOL size differs from the specified
source volume size.
51157110
WYou cannot create the specified pair.
Delete the created pair, then retry the
operation.
You cannot create another pair, because
the number of pairs exceeds the
maximum.
51167110
WSelect the S-VOL, and retry the
operation.
The S-VOL is not selected.51197110
254 Message (part code group 7nnn)

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English