Part code 8110
Table 67 Error codes (part code 8110)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WWait about three minutes, then retry.Starting file transfer client.50018110
WThe acquired data is inaccurate. If this
problem persists, please contact HP
Technical Support.
Inaccurate data was acquired.50028110
WRetry the operation.Failed to get the data.50038110
WCorrect the first tag.The first tag is invalid.50048110
WCorrect the specified contents, and retry
the operation.
The file name should be from 1 to 32
characters.
56278110
WCorrect the specified contents, and retry
the operation.
Following characters cannot be used for
the file name: " \ / , : ; * ? < > | and
space.
56288110
WCorrect the specified contents, and retry
the operation.
The file specified by [File Name on
Client] does not exist.
56298110
WCorrect the specified contents, and retry
the operation.
The file specified by [File Name on
Client] cannot be read.
56308110
WCorrect the specified contents, and retry
the operation.
The object specified by [File Name on
Client] is not a file.
56318110
WCorrect the specified contents, and retry
the operation.
The file path should be from 1 to 255
characters.
56338110
EIf the same problem persists despite
retrying, please contact HP Technical
Support.
An error occurred during processing. If
this problem persists, please contact HP
Technical Support.
56348110
WModify mode released due to inactivity.
Restart Modify mode (press the
mode-switching button again) to
continue.
Modify mode released due to inactivity.
Restart Modify mode (press the
mode-switching button again) to
continue.
57728110
WCorrect the specified contents, and retry
the operation.
The file path of the specified file by [File
Name on Client] is incorrect.
57738110
WCorrect the specified contents, and retry
the operation.
The file specified by [File Name on
Client] is write-protected.
57748110
WCorrect the specified contents, and retry
the operation.
A file access error occurred.57758110
WCorrect the specified contents, and retry
the operation.
The file type is invalid. Please select the
file with the extension "*.spd".
57768110
EIf this problem persists, please contact
HP Technical Support.
An error occurred during processing. If
this problem persists, please contact HP
Technical Support.
70608110
WClick [YES] for continuing processing.
Click [NO] when you want to stop.
It is necessary to install Java Web Start.
Do you want to install it?
93388110
WClick [OK] to log off after installation.Please re-start your management session
after Java Web Start installation.
93398110
WTo continue processing, click [OK].
Otherwise, click [Cancel].
Do you want to install Java Web Start?93598110
iTo overwrite the file, click [OK].
Otherwise, click [Cancel].
Do you want to overwrite the existing
file?
590368110
Part code 8110 269
To Next Page
Loading...
Need help?
General