HP StorageWorks P9000 - Disk Arrays User Manual

Table 33 Error codes (part code 03022) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
iThe task status is changed. Close the
window, then check the task status.
The interruption processing was
completed.
10527403022
iCheck the setting(s).The current setting exceeds the maximum
number of quick formatting that can be
executed.
10527503022
WCheck the setting(s).This functionality is not available. Virtual
LVI is required.
10527903022
WCheck the setting(s).This functionality is not available. Open
Volume Management is required.
10528003022
ECheck the setting(s).There is no LDEV that can be formatted.10528103022
WCheck the setting(s).This functionality is not available. Open
Volume Management is required.
10528303022
WCheck the setting(s).The pool or the pool volume that is
associated with the target LDEV is
blocked.
10528303022
Part code 03121
Table 34 Error codes (part code 03121)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WTo continue the processing, click [OK].
Otherwise, click [Cancel].
Are you sure you want to initialize all
the THP pools?
10920503121
Part code 03122
Table 35 Error codes (part code 03122)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the password, then retry the
operation.
The password is invalid.10526403122
WCheck the support configuration of pools,
then retry the operation.
No more pools can be registered,
because the number of registered pools
has reached the maximum.
10600503122
WCheck if there is a volume that can be
set as a pool volume, then retry the
operation.
The volume that can be set as a pool
volume does not exist.
10600603122
WCheck the support configuration of pools,
then retry the operation.
The setting cannot be performed,
because the number of pools exceeds
the maximum.
10600703122
WSpecify the volume, then retry the
operation.
The volume to be set as a pool volume
is not selected.
10600803122
WReduce the number of selected pool
volumes, then retry the operation.
The setting cannot be performed,
because the number of pool volumes that
can be set to a pool exceeds the
maximum.
10600903122
Part code 03121 93

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English