Table 56 Error codes (part code 6610) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the number of registered journals.No more journals can be registered,
because the number of registered
journals has reached the maximum.
690176610
WCheck the LDKC number for the specified
data volume, and specify only one LDKC
number.
There are two or more LDKC numbers
for the specified data volume. In this
operation, please specify only one LDKC
number.
690186610
WReduce the number of data volumes and
retry the operation.
You cannot create additional volume
pairs once the maximum number has
been reached
The number of data volumes exceeds the
maximum.
690196610
WCheck the number of registered EXCTG.Journals cannot be added to the
extended consistency group (EXCTG),
because the number of EXCTG exceeds
the maximum.
690216610
WTo continue the operation, click [OK].
Otherwise, click [Cancel].
Do you want to release the remote
command device from the mirror?
690846610
Part code 6805
Table 57 Error codes (part code 6805)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf the same problem persists despite
retrying, please contact HP Technical
Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
50996805
EIf the problem persists despite retrying,
please contact HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
60126805
WIf this problem persists, please contact
HP Technical Support.
The SVP is busy. Please wait for a while,
and then retry the operation.
60236805
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
70606805
EIf the same error occurs despite retrying,
please contact HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
71116805
EIf the same error occurs despite retrying,
please contact HP Technical Support.
This error code is not registered.73106805
WRetry the operation. If the same problem
persists despite retrying, please contact
HP Technical Support.
A communication time-out error occurred
in the subsystem. Please wait for a while,
and then retry the operation.
80016805
WWait a moment and retry.Error happened after some change
occurred. Please refresh the array
configuration. Communication busy.
Please retry later.
80026805
EPlease contact HP Technical Support.The configuration could not be changed.81106805
Part code 6805 219
To Next Page
Loading...
Need help?
General