Table 36 Error codes (part code 3205) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the total capacity of THP-VOLs
defined in the specified pool and its pool
settings. If this problem persists, please
contact HP Technical Support.
The total capacity of THP-VOLs defined
in the specified pool exceeds the value
that had been permitted to the pool.
689203205
WDelete unnecessary volumes, then retry
the operation. If this problem persists,
please contact HP Technical Support.
A sufficient Cache Control Device cannot
be allocated to the target volume.
780473205
Part code 03222
Table 37 Error codes (part code 03222)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf the same problem persists despite
retrying, please contact HP Technical
Support.
There is no data.10519003222
EExecute refresh.The process cannot continue due to
internal logic contradiction.
10519103222
EExecute refresh.The association information of the
specified LDEV does not exist in the
configuration.
10519203222
WCheck the setting(s).The status of the specified LDEV is not
normal.
10519303222
WCheck the setting(s).The input value is out of the setting
range.
10519403222
WCheck the setting(s).Zero is set in the size.10519503222
WCheck the setting(s).The size is not specified.10519603222
WCheck the setting(s).Other than the numerical value is set in
the size.
10519703222
WCheck the setting(s).The specified LDEV is not an THP volume.10519803222
WCheck the setting(s).The specified LDEV is not in the state of
zero data discarding.
10519903222
WCheck the setting(s).The specified LDEV is in the state of zero
data discarding.
10520003222
EExecute refresh.The specified LDEV does not exist in the
configuration.
10520103222
EExecute refresh.The status information of the specified
LDEV does not exist in the configuration.
10520203222
EExecute refresh.The detailed information of the pool that
is associated with the specified LDEV
does not exist in the configuration.
10520303222
EPlease decrease the number of selections
of volumes of the object or add the
capacity of the pool.
The selected volume cannot be enhanced
any further.
10521103222
100 Message (part code group 3nnn)