Table 65 Error codes (part code 8105) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
60128105
WIf the same problem persists despite
retrying, please contact HP Technical
Support.
The SVP is busy. Please wait for a while,
and then retry the operation.
60238105
ERetry the operation a little later.A command was double started.65138105
WCorrect the port information or the PCB
mode information.
The port information is inconsistent with
PCB mode information.
65248105
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
70608105
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
71118105
ECheck the spreadsheet, and match the
serial number under the [SerialNumber]
function tag and the DKC serial number.
The DKC serial number does not match.656398105
ECheck the spreadsheet, and make only
one description of the [SerialNumber]
function tag.
Two or more spreadsheet declaration
statements and function tags cannot be
entered in the spreadsheet file.
660038105
ECheck the spreadsheet, and enter a
serial number under the [SerialNumber]
function tag.
The spreadsheet declaration statement
or the definition statement is not entered
in the spreadsheet file.
660058105
ECheck the spreadsheet, and enter only
one serial number under the
[SerialNumber] function tag.
The number of data items entered in the
spreadsheet has exceeded the limit.
660068105
ECheck the spreadsheet, and set the
number of digits of the serial number
under the [SerialNumber] function tag
to five or less.
The number of digits is invalid.660088105
ECheck the spreadsheet, and change the
serial number under the [SerialNumber]
function tag to a decimal numeral.
The format is invalid.660108105
WCheck the settings, then retry the
operation.
The selected WWN has been registered
in a host group.
750098105
Part code 8107
Table 66 Error codes (part code 8107)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the setting.The number of lines exceeds the
maximum number of lines of a
spreadsheet.
56418107
WCheck the setting.The number of characters exceeds the
maximum number of characters of a
spreadsheet.
56428107
WIf the same error occurs despite retrying,
please contact HP Technical Support.
A time-out error occurred. Please wait
for the SVP to reboot, and then retry the
operation.
56438107
268 Message (part code group 8nnn)