Part code 6010
Table 52 Error codes (part code 6010)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCorrect the specified contents, and retry.The Priority value is invalid. Specify the
correct value.
50106010
WCorrect the specified contents, and retry.The Range value is invalid. Specify the
correct value.
50116010
WCorrect the specified contents, and retry.The Error Level value is invalid. Specify
the correct value.
50126010
WCorrect the specified contents, and retry.The Fence value is invalid. Specify the
correct value.
50136010
WCorrect the specified contents, and retry.The Force value is invalid. Specify the
correct value.
50146010
WCorrect the specified contents, and retry.The R-VOL Write value is invalid. Specify
the correct value.
50156010
WCorrect the specified contents, and retry.The Split-r/Suspend kind value is invalid.
Specify the correct value.
50166010
WCorrect the specified contents, and retry.The Update value is invalid. Specify the
correct value.
50176010
WSpecify what you register, and retry.The displayed information has not been
changed.
50306010
WCorrect the specified contents, and retry.There are no RCUs in the CU. Please try
again after registering RCUs.
50346010
WCheck the condition for setting
parameter, and re-execute the setting.
The combination of parameters which
you specified is not permitted. Please
specify a valid combination of
parameters.
51316010
WCheck the contents, and retry.The Operation value is invalid. Specify
the correct value.
51376010
WCheck the contents, and retry.The value specified for Gathering Interval
is invalid. Specify a valid value within
the range of 1 to 15.
51386010
WCheck the contents, and retry.The Script File Name value is invalid.
Specify the correct value.
51396010
WSpecify the correct CU number.The specified CU number is incorrect.
Specify the correct CU number.
51406010
WSpecify the correct device number.The specified LDEV number is incorrect.
Specify the correct LDEV number.
51416010
WSpecify the correct group number.The specified GID is incorrect. Specify
the correct GID.
51426010
WSpecify the correct LUN.The specified LUN is incorrect. Specify
the correct LUN.
51436010
WCheck the entered values, then specify
correct values.
Some of the entered values are incorrect.
Check the values and then specify
correct values.
51446010
EPlease contact HP Technical Support.An error occurred in the client logic.70606010
EPlease contact HP Technical Support.An error occurred in the client logic.73016010
158 Message (part code group 6nnn)