HP StorageWorks P9000 - Disk Arrays User Manual

Table 21 Error codes (part code 0605) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WSet the Audit Log buffer function to
“Disable,” then retry the operation.
The volume to be maintained includes
the system disk being used at Audit Log.
688020605
WRelease the allocation of mirrors in the
Journal for the remote command device,
then retry the operation.
The specified volumes include remote
command devices being used with
mirrors in the Journal of the Continuous
Access Journal or the Continuous Access
Journal Z.
688710605
WRelease the quorum disks, then retry the
operation.
Quorum disks are included in the items
to be maintained.
688840605
WCheck the status of the mapping path
and resolve the root cause of blockade,
then retry the operation.
An external volume was not able to be
recovered.
689010605
WCheck the status of the mapping path
and resolve the root cause of blockade
if needed, then retry the operation.
The external volume was able to be
restored, but some of mapping paths
were not able to be restored normally.
689020605
WCheck the states of the external volume
and the mapping path, and do not retry
the operation until the states return to
normal.
If the states cannot be restored to normal,
or if the problem persists despite retrying,
please contact HP Technical Support.
Failed to disconnect from the external
volume.
689030605
WRecover the blocked Processor Blade,
then specify it.
The specified Processor Blade is blocked.780310605
WCheck the specified Processor Blade.The specified Processor Blade is not
mounted.
780320605
WDelete unnecessary volumes, then retry
the operation. If this problem persists,
please contact HP Technical Support.
A sufficient Cache Control Device cannot
be allocated to the target volume.
780470605
Part code 00622
Table 22 Error codes (part code 00622)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the check boxes for the items that
you want to change, then retry the
operation.
All the check boxes are cleared.10500900622
WSelect one or more table rows.[Detail] is clicked without selecting any
row.
10504000622
WSelect one or more table rows.[Delete] is clicked without selecting any
row.
10504200622
WCheck the setting(s).The setting cannot be changed, because
an invalid value has been input.
10508400622
WInstall a necessary program product.
Otherwise, execute the operation with
the user ID who has a permission to
execute editorial operation, or permit the
user to enable the operation.
A necessary program product is not
installed, or insufficient permissions to
execute editorial operation.
10520400622
48 Message (part code group 0nnn)

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English