Part code 00122
Table 13 Error codes (part code 00122)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WDownload the Audit Log.The free space for storing audit log files
is running out. Usage Rate {0}%
10526000122
EDownload the Audit Log.The free space for storing audit log files
has run out. The old audit log information
will be overwritten. Usage Rate {0}%
10526100122
WDownload the audit log again and save
the file for resetting the audit log.
The audit log is not reset because the file
of the audit log is not saved.
10701600122
EIf the same problem persists despite
retrying, please contact HP Technical
Support.
The processing cannot continue due to
an internal logical contradiction.
10701700122
EIf the same problem persists despite
retrying, please contact HP Technical
Support.
The state of Audit Log cannot be
acquired.
10702000122
ECheck that the power is supplied to the
DKC. If the same problem persists
despite retrying, please contact HP
Technical Support.
The lock status of the resource cannot be
obtained.
10702100122
i-The free space for storing audit log files
is normal value. Usage Rate {0}%
10901100122
Part code 00222
Table 14 Error codes (part code 00222)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the setting(s).The characters used for the user name
or the number of the characters of the
user name is invalid.
10521200222
WCheck the setting(s).A radio button for Account Status is not
selected.
10521300222
WCheck the setting(s).A radio button for authentication is not
selected.
10521400222
WCheck the setting(s).The characters used for the password or
the number of the characters of the
password is invalid.
10521500222
WCheck the setting(s).The re-entered password does not match
the password which entered previously.
10521600222
WEnter a correct password.The specified current password is
incorrect.
10521700222
WSpecify a password different from the
current one.
The new password is identical to the
current password.
10521800222
WCheck the setting(s).The characters used for the new
password or the number of the
characters of the new password is
invalid.
10521900222
26 Message (part code group 0nnn)
To Next Page
Loading...
Need help?
General