Table 29 Error codes (part code 2005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
60362005
WThere is no error in this setting. However,
there is an error in another setting, and
the setting processing has not been
executed.
There is no error in this setting. However,
there is an error in another setting and
the setting processing has not been
executed.
65372005
WAssociate the Thin Provisioning volume
with a pool, then retry the operation.
The Thin Provisioning volume is not
associated with a pool.
656602005
WSelect another volume.Thin Provisioning volume(s) cannot be
combined into LUSE volumes.
656722005
WAssociate the Thin Provisioning volumes
with the same pool, then retry the
operation.
The Thin Provisioning volumes are not
associated with the same pool.
657042005
WCheck the setting.The LUSE operation cannot be
performed, because the specified volume
is being used as a quorum disk.
657892005
WCheck the contents of the spreadsheet.The description of the operation tag is
invalid.
660042005
WCheck the contents of the spreadsheet.The same definition exists in the
spreadsheet file. (The combination of a
CU number and an LDEV number is
repeated.)
660122005
WCheck the contents of the spreadsheet.There is a line that cannot be interpreted
as an element of the spreadsheet.
665742005
WCheck the contents of the spreadsheet.The syntax of parameter is incorrect.666752005
WCheck the contents of the spreadsheet.The parameter of lower-level hierarchy
is incorrect.
667972005
Part code 2010
Table 30 Error codes (part code 2010)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCorrect the settings, then retry.The LUSE volume cannot be released
because the access attribute of the
specified volume is not Read/Write.
50302010
WCorrect the specified content, and retry.There are no LDEVs to set the LUSE top
volume. Check the specified LDEVs.
50322010
WCorrect the specified content, and retry.There are no available LDEVs to make
the LUSE. Check the specified LDEVs.
50332010
WSelect LDEV and retry.No LDEV is specified.50502010
WCheck the content of the operation.You cannot delete the first LDEV of a
LUSE volume.
50512010
WCheck the content of the operation.More than 36 volumes cannot be
combined to form an LUSE.
50542010
WFollow the correct operation procedure.The size of the LUSE volume exceeds
64,424,505,600 KB.
50552010
74 Message (part code group 2nnn)
To Next Page
Loading...
Need help?
General