HP StorageWorks P9000 - Disk Arrays User Manual

Table 57 Error codes (part code 6805) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
ERetry the same operation several times.
If this problem persists, please contact
HP Technical Support.
The subsystem status is invalid. Please
contact HP Technical Support.
83106805
EInstall necessary PCBs.Please install necessary PCBs.86596805
WCorrect the cache resource number (CLPR
No.), then retry the operation. If this
problem persists, please contact HP
Technical Support.
An invalid cache resource number (CLPR
No.) was detected.
550096805
EPlease contact HP Technical Support.An invalid storage resource number
(SLPR No.) was detected.
550106805
WSpecify the number of CLPRs within the
valid range.
The maximum number of CLPRs that can
be created was exceeded.
552096805
WCorrect the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
The Block Option setting is incorrect.552106805
WCorrect the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
The Do not Block (Volume Level) option
setting is incorrect.
552116805
WCorrect the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
The options "Block Option" and "Do not
Block (Volume Level)" cannot be
specified at the same time.
552126805
WCorrect the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
The Level 1 Threshold setting is incorrect.552136805
WCorrect the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
The Level 2 Threshold setting is incorrect.552146805
WCorrect the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
The Level 1 SIM setting is incorrect.552156805
WCorrect the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
The Level 2 Suspend setting is incorrect.552166805
EPlease contact HP Technical Support.The maximum number of SLPRs that can
be set was exceeded.
552176805
WCorrect the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
The Level 1 Sleep setting is incorrect.552186805
WCorrect the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
The Sleep Time setting is incorrect.552196805
EPlease contact HP Technical Support.The SLPR number is duplicated.552206805
WCorrect the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
The CLPR number is duplicated.552216805
EPlease contact HP Technical Support.This function cannot be used by the
storage partition administrator.
565246805
220 Message (part code group 6nnn)

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English