HP StorageWorks P9000 - Disk Arrays User Manual

Table 33 Error codes (part code 03022) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the setting(s).An LDEV cannot be added because the
free space in the selected pool is
insufficient.
10518903022
ECheck the setting(s).LDEV that has already been set has been
selected.
10519103022
ECheck the setting(s).LDEV not set has been selected.10519203022
ECheck the setting(s).The number of data patterns exceeds the
setting range.
10519303022
EExecute refresh, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
An error occurred while formatting.10519403022
EExecute refresh, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
An error occurred while preparing the
quick format.
10519503022
ECheck the setting(s).Any further, the Pool that selects it cannot
set the volume.
10520503022
EExecute refresh, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
An error occurred in the shredding
processing.
10523103022
ESpecify another unused SSID number.The same SSID is specified.10523203022
EEnter the SSID number with 4 digits.The specified number of digits for SSID
is incorrect.
10523303022
EExecute refresh.The processing cannot continue due to
an internal logical contradiction.
10524803022
WCheck the setting(s).Insufficient free space to create LDEV.10524903022
ECheck the setting(s).Two or more Basic exists together to
External.
10525003022
EPlease operate it again after executing
Shredding.
There is no output file.10525903022
ICheck the setting(s).An LDEV that Snapshot is set has been
selected.
10526303022
iClick [OK] to shred.Volumes that can be shredded in the
selected volumes will be displayed.
10526703022
WSelect the free spaces again from the
Select Free Space window.
The selected status will be canceled
because the number of free spaces that
exist in the selected parity group exceeds
the number that can be set.
10527003022
WSelect the free spaces again from the
Select Free Space window.
The number of free spaces that exist in
the selected parity group exceeds the
number of volumes that can be set.
10527103022
WCheck the setting(s).Data Output cannot be set more than 3.10527203022
iWait for a while, then retry the
operation.
The interruption process cannot be done
because there is an unexecuted specified
task.
10527303022
92 Message (part code group 3nnn)

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English