HP StorageWorks P9000 - Disk Arrays User Manual

Table 35 Error codes (part code 03122) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the specified value of the
subscription limit, then retry the
operation.
The specified pool subscription limit
value cannot be set.
10601003122
WEnter prefix characters with a valid
number for the pool name.
The number of prefix characters of the
pool name is invalid.
10601103122
WCheck the prefix characters of pool
name, then retry the operation.
The specified prefix characters for a pool
name contain an invalid character(s).
10601203122
WCheck the initial number of pool name,
then retry the operation.
The initial number of specified pool
name is not input.
10601303122
WCheck the initial number of pool name,
then retry the operation.
The specified initial number of pool
name contains a character other than
the numerical value.
10601403122
WCheck the initial number of pool name,
then retry the operation.
The specified initial number of pool
name exceeds the maximum.
10601503122
WCheck the pool name, then retry the
operation.
The number of characters that can be set
for the pool name exceeds the maximum,
or some spaces are set.
10601603122
WSpecify another pool name, then retry
the operation.
The specified pool name is already used.10601703122
WCheck the specified pool ID, then retry
the operation.
The specified pool ID is incorrect.10601803122
WSpecify a pool ID that is smaller than the
one specified before, then retry the
operation.
The allocation cannot be done from the
specified pool ID.
10601903122
WSelect the same volume type, then retry
the operation.
The selected volumes cannot be specified
as a pool volume, because the volume
types are different.
10602103122
WSpecify the volumes that have the same
cache mode, then retry the operation.
The selected volumes cannot be specified
as a pool volume, because the cache
modes of the selected volumes coexist.
10602203122
WSpecify the volumes that have the same
CLPR, then retry the operation.
The selected volumes cannot be specified
as a pool volume, because different
CLPRs selected coexist.
10602303122
WRestore the status of the pool, then retry
the operation.
The operation cannot be executed,
because the specified pool is blocked.
10602403122
WDelete the pool.The operation cannot be executed,
because the specified pool is blocked.
10602503122
WRestore the status of the pool volume,
then retry the operation.
The operation cannot be executed,
because the pool volume is blocked.
10602603122
WCheck the usage rate of the pool, then
retry the operation.
The operation cannot be executed,
because the pool usage exceeds the
threshold.
10602703122
WStop the shrinking operation on the pool,
then retry the operation.
The operation cannot be executed,
because the specified pool is in shrinking
operation.
10602803122
WCheck the status of the pool, then retry
the operation.
The operation cannot be executed,
because the specified pool is in Normal
status.
10602903122
94 Message (part code group 3nnn)

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English