Table 45 Error codes (part code 05122) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WWait for a while, then retry the
operation.
The graph cannot be displayed, because
there is no graph data.
10511205122
WRetry the operation if you need the real
time graph display.
The real time graph display will end due
to changing the monitoring switch.
10511305122
WReduce the number of CUs to be
monitored to 64 or fewer.
The CU to be monitored cannot be
added, because the number of CUs that
can be specified exceeds the maximum.
10511405122
WReduce the number of WWNs to be
monitored to 2048 or fewer.
A WWN to be monitored cannot be
added, because the number of graph
display objects exceeds the maximum.
10511505122
WReduce the number of WWNs to be
monitored to 32 or fewer per port.
A WWN to be monitored cannot be
added, because the number of graph
display objects per one port exceeds the
maximum.
10511605122
WClick [OK].The Graph Display Term cannot be
changed, because there is no graph
data.
10522605122
WEdit the HBA WWN. If you do not edit
it, uncheck the check box.
The HBA WWN is unedited.10522705122
WEdit the WWN Name. If you do not edit
it, uncheck the check box.
The WWN Name is unedited.10522805122
WDelete unnecessary monitoring WWNs,
then retry the operation.
No more WWN to be monitored can
be added, because the number of
monitoring WWNs has reached the
maximum.
10522905122
WClick [OK].There are no selectable parity groups.10523005122
EIf the same problem occurs again, close
the windows, and retry the operation
after the internal processing or the
configuration change has been
completed. If the internal processing or
the configuration change takes much
time to complete, please contact HP
Technical Support.
The disk subsystem is in internal process,
or some other user is changing the
configuration. Wait, then retry the
operation.
10524705122
WSet the number of graph items per one
graph panel to 8 or less.
No more graph items can be added
because the number of graph items that
can be displayed in one graph panel
has reached the maximum.
10525405122
ERefresh the window, then retry the
operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
The process cannot continue due to
internal logic contradiction.
10700105122
ERefresh the window, then retry the
operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
The process cannot continue due to
internal logic contradiction.
10700205122
114 Message (part code group 5nnn)
To Next Page
Loading...
Need help?
General