Table 53 Error codes (part code 6505) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WWait until the storage system is ready.The operation is impossible because the
subsystem is being powered on.
580346505
WCheck the number of the journal volumes
in the specified journal groups. Also,
check the number of the selected
volumes.
No more journal volumes can be
registered, or too many volumes are
selected.
580356505
WCheck the emulation type of the specified
volume.
The device emulation type of the
specified volume is not supported.
580366505
WCheck the status of the specified journal.The specified journal cannot be deleted,
because there is a data volume.
580376505
WCheck the number of registered path
group IDs.
No more path group IDs can be
registered.
580386505
WSpecify another volume.The specified volume is already used as
a journal volume or a data volume.
580396505
ECheck the SSB log, then contact HP
Technical Support.
An internal error occurred.580406505
WReduce the number of requests to be
processed at one time. Then retry the
operation.
Too many requests. Please reduce the
number of requests to be processed at
one time. After that, please retry the
operation.
580646505
WCheck the specified LDEV number.Invalid parameter (LDEV number).580656505
WCheck the specified journal number.Invalid parameter (Journal number).580666505
WCheck the specified mirror ID.Invalid parameter (Mirror ID).580676505
WCheck the specified JNL Control
parameter.
Invalid parameter (Journal Control).580686505
WCheck the specified Suspend Condition
parameter.
Invalid parameter (Suspend
Condition-Journal Full).
580696505
WCheck the specified Suspend Condition
parameter.
Invalid parameter (Suspend
Condition-Master Journal Failure).
580706505
WCheck the specified Suspend Condition
parameter.
Invalid parameter (Suspend
Condition-Restore Journal Failure).
580716505
WThe current configuration of the storage
systems and the current status of lines
connecting the storage systems may not
satisfy the operating conditions. Check
the configuration of the storage systems
and the status of lines connecting the
storage systems, then check whether the
status of the Remote Copy pair is
changed.
The pair status has not changed yet.
Check the configuration of the
subsystems and the status of lines
connecting the subsystems, and then
check whether the status of the Remote
Copy pair is changed.
580726505
WIf the same error occurs despite retrying,
please contact HP Technical Support.
The subsystem is busy. Wait for a while,
and then retry the operation.
580736505
WCheck the specified serial number.The specified serial number is incorrect.580756505
WCheck the status of the specified volume.The specified volume does not exist or
is unusable.
580786505
Part code 6505 175
To Next Page
Loading...
