Table 3 Error codes (part code 0003) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
20020003
WWait a while, then click [Refresh]. If this
problem persists, inconsistency of
configuration may have occurred. Please
contact HP Technical Support. If the
problem occurred when starting SVP,
check the version number of the
microcode and the configuration
information.
Such as Auto LUN and QuickRestore are
in progress.
20030003
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
20040003
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
20050003
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
20060003
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
20090003
EPlease contact HP Technical Support.The status of the storage system requires
maintenance (for example, the storage
system is blocked, the shared memory is
inconsistent, or some other factor).
20110003
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
20120003
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
20130003
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
20140003
EWait, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
An error occurred while connecting to
the storage system.
20150003
WWait, then retry the operation.A service engineer is accessing the
system in Modify mode.
20160003
WRe-execute the request for starting
exclusive lock.
Network error detected; exclusive lock
is released forcibly.
20170003
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
20220003
WWait, then retry the operation.Communication busy.20320003
WWait, then click [Refresh] on the [File]
menu. When an error occurs during a
login, wait, then log in again.
The SVP is not ready yet, or an internal
processing is being executed.
20330003
ECheck the DKC status and the current
status of the configuration setting. If
necessary, re-execute the setting
operation.
The subsystem status is invalid.20830003
18 Message (part code group 0nnn)
To Next Page
Loading...
Need help?
General