HP StorageWorks P9000 - Disk Arrays User Manual

Table 59 Error codes (part code 7005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WWait until Reverse Copy or Quick
Restore completes.
The command has been rejected,
because the pair sharing the P-VOL was
in the Reverse Copy or Quick Restore
status.
86407005
WWait until Reverse Copy or Quick
Restore completes.
The L1 pairs contain a pair in the
Reverse Copy or Quick Restore status.
86417005
WWait until the status of the pair sharing
the P-VOL becomes PAIR, then retry the
operation.
See the section "Operations permitted
for L1, L2 pairs" in the HP StorageWorks
P9000 Business Copy User Guide for
the relation between the status of pairs
and Business Copy operations.
The command has been rejected,
because the specified S-VOL is shared
as the P-VOL of the other pair and the
pair is in the COPY(RS-R) status.
86427005
WThe Pairresync operation cannot be
executed in the current pair status.
See the section "Resynchronize pairs" in
the HP StorageWorks P9000 Business
Copy User Guide for the relation
between the state of pairs and the
Business Copy operations.
The Pairresync operation has been
rejected, because the specified pair is
not in the state of PSUS.
86437005
WCheck the pair status.The command has been rejected,
because the pair status is not PSUS or
PSUE.
86447005
WYou cannot execute the specified
operation. Release the Remote Copy pair
for the operation.
The Reverse Copy command has been
rejected, because the P-VOL is shared
as the S-VOL of a Remote Copy pair.
86457005
WDelete the Remote Copy pair.The Reverse Copy request was rejected,
because the P-VOL was shared with a
Remote Copy pair in the non-suspend
status.
86467005
WDelete the Remote Copy pair.The Reverse Copy command has been
rejected, because the S-VOL is shared
as the S-VOL of a Remote Copy pair.
86477005
WCheck the specified volume number.The boot device and the P-VOL do not
match in the Paircreate command.
86487005
WCheck the specified volume number.Because the boot device is the S-VOL in
the Pairsplit-S command, the flag does
not match.
86497005
WCheck the target volume number.The boot device and the P-VOL do not
match in the Paircreate, Pairresync, or
Pairsplit-S command.
86507005
WCheck the contents, and retry.The SSID is invalid.86517005
WCheck the target volume number.The boot device is not a P-VOL nor
S-VOL.
86527005
WCheck the target volume number.Because the boot device is the P-VOL in
the Pairsplit-S command, the flag does
not match.
86537005
230 Message (part code group 7nnn)

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English