HP StorageWorks P9000 - Disk Arrays User Manual

Table 63 Error codes (part code 7110) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WTo continue processing, click [OK].
Otherwise, click [Cancel].
Do you want to execute the Initialize
operation?
91107110
iTo continue processing, click [OK]. To
stop processing, click [Cancel].
Do you want to enable the setting to
expand the number of relationships?
93777110
iTo continue processing, click [OK]. To
stop processing, click [Cancel].
Do you want to disable the setting to
expand the number of relationships?
93787110
WCheck the selected T-VOLS.The selected T-VOLs include a volume or
volumes that is/are paired.
550037110
WCorrect the number of selected S-VOLs
and T-VOLs.
The number of selected S-VOLs doesn't
match the number of selected T-VOLs.
Correct the number of selected S-VOLs
and T-VOLs.
550047110
WCheck the values, then enter correct
values.
The entered values are incorrect. Check
the values and then enter correct values.
555977110
WRefresh the window, then retry the
operation.
The operation cannot be executed
because an invalid value is contained in
the obtained information. Refresh the
window and then retry the operation.
586197110
iTo continue the operation, click [OK].The CLPR used for the S-VOL differs from
the CLPR used for the T-VOL. Do you
want to continue this operation?
590007110
ETo continue the operation, click [OK].The S-VOL and the T-VOL belong to
different SLPRs. Do you want to continue
this operation?
590487110
EPlease contact HP Technical Support.The S-VOL and the T-VOL belong to
different SLPRs. If you perform this
operation, the storage partition
administrator will become unable to
operate.
Do you want to continue this operation?
590697110
WTo continue processing, click [OK].
Otherwise, click [Cancel].
The data has been changed. The settings
will be discarded if you continue the
processing. Do you want to switch the
LDKC?
656627110
WDelete SI Operation for FICON(R) Data
Migration that is already registered, or
select another volume.
Pairs cannot be created any more
because SI Operation for FICON(R) Data
Migration is already registered to the
specified volume.
657297110
WClick [OK], then continue the operation.Information was updated by other users.
The list will scroll to the top.
661027110
WChange the number of the Preview data
to 16,384 or less.
The maximum number of Pairs or
Volumes that can be displayed in the
Preview List is 16,384. Change the
number of pairs or volumes that is
displayed in the Preview List to 16,384
or less.
665607110
WChange the status of the excluded pair.Some pairs are excluded from the pairs
to be set, because pairs in invalid status
for Split Pair are included in the specified
pairs
690257110
256 Message (part code group 7nnn)

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English