HP StorageWorks P9000 - Disk Arrays User Manual

Table 73 Error codes (part code 8510) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WSelect another parity group, then retry
the operation.
The concatenated parity group cannot
be set across multiple CLPRs. Please
select another parity group, and then
retry the operation.
552618510
WApply the tentative settings with no parity
groups to the CLPR that you have
created, then migrate the parity group.
The Parity Group cannot be migrated to
the CLPR that you newly created. Please
apply the tentative settings with no parity
groups to the CLPR that you have
created, and then migrate the parity
group.
552628510
WMigrate all parity groups in the CLPR to
another CLPR, then delete the CLPR.
The CLPR that has some parity groups
cannot be deleted. Migrate all parity
groups in the CLPR to another CLPR, and
then delete the CLPR.
556368510
EIf you clicked [Yes], set the changes
again.
If you clicked [No], retry the operation.
If this problem persists, please contact
the system manager.
The partition configuration may contain
some inconsistent information.
To initialize partition configuration, select
the Yes button.
To stop the operation, select the No
button.
570018510
WCheck the settings.The maximum number of SSIDs that can
be registered will be registered except
the duplicate SSIDs.
590678510
iCheck the settings.The SSID(s) are associated with the
specified CU. All SSIDs that are
associated with the CU are to be added
to this SLPR.
591018510
iCheck the settings.The SSID(s) are associated with the
specified CU. All SSIDs that are
associated with the CU are to be deleted
from this SLPR.
591028510
WCheck the settings.SSIDs that are associated with the
selected CU cannot be added to this
SLPR, because too many SSIDs have
been set in the SLPR. Delete unnecessary
SSIDs from this SLPR, and then retry the
operation.
591108510
ECheck the settings.Ports in high-speed mode are set across
multiple SLPRs. If you perform this
operation, the users having access to
these SLPRs will lose the privilege. Do
you want to continue this operation?
591148510
iClick [OK].Notice from Partition Definition :
Installation of Open System Array
Management is required to create more
than four CLPRs.
790008510
iClick [OK].Notice from Partition Definition :
Additional cache memory is required for
CLPR0 to create a CLPR.
790018510
iClick [OK].Notice from Partition Definition :
CLPR cannot be made any more.
790028510
276 Message (part code group 8nnn)

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English