Table 90 Error codes (part code 20020) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
EConfirm whether you are authorized.Failed to start the session due to no user
authority.
10704220020
ECheck the environment.Failed to save the specific information of
user.
10704320020
ECheck the environment.Failed to save the specific information of
user.
10704420020
ECheck the environment.Failed to save the specific information of
user.
10704520020
EYou cannot connect to the SVP due to an
error on the network or the SVP.
• Check the IP address. If the IP address
is correct, close the browser and log
in again after a while. If the problem
persists, please contact HP Technical
Support.
• The version of Remote Web Console
may not match the version of
destination SVP. Clear the cache of
JRE and browser, then restart the
browser and retry the operation.
• The Remote Web Console executes
a program by downloading it via the
network. If you use a proxy server,
the old version of the program might
remain in the cache of the proxy, and
might be downloaded and executed.
If this problem persists, contact your
network administrator. If this problem
still persists even if your network does
not have any problem, please contact
HP Technical Support.
A network error occurred. The causes
might be one of the following.
• The SVP was not ready.
• An error occurred in the SVP.
• A timeout error occurred while
communicating with the SVP.
10704620020
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
10704720020
WIf this problem persists, please contact
HP Technical Support.
The capacity of a memory is insufficient
to handle requests.
10704820020
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
10704920020
EIf this problem persists, please contact
HP Technical Support.
An error occurred during SVP
processing.
10705020020
WSpecify a correct value.Failed to login.10705120020
ECheck if the specified XML file is valid.Failed to convert an XML file.10705220020
ESpecify a correct value.The parameter is specified incorrectly.10705320020
ESpecify a correct value.The parameter is specified incorrectly.10705420020
EWait for a while, then retry the
operation.
The number of onetime keys has
exceeded the maximum.
10705520020
ERetry the operation.The specified onetime key already exists.10705620020
ECheck the environment.The certificate does not exist.10705720020
ECheck the environment.Failed to create a certificate object.10705820020
298 Message (part code group 20nnn)