HP StorageWorks P9000 - Disk Arrays User Manual

Table 26 Error codes (part code 01022) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the setting(s).The LUN ID cannot be set, because the
value is outside the range.
10508701022
ECheck the check boxes for the items that
you want to change, then retry the
operation.
The table column is not selected.10508801022
WCheck the setting(s).The number of LUNs that can be set to
the specified port has exceeded the
maximum.
10508901022
WCheck the setting(s).The specified LDEV and an LDEV with
LUN registered to the specified host
group have the same ID.
10509001022
WCheck the setting(s).The number of selected host groups that
can be set exceeds the maximum value.
10509101022
WCheck the setting(s).The attribute of the specified port is
neither Target nor RCU Target.
10509301022
WSpecify the HBA WWN with 16 digits
in hexadecimal.
The length of the HBA WWN is
incorrect.
10509401022
WInstall the program product. Or, execute
the operation with the user who has an
editorial permission, or set the editorial
permission to the user.
The operation cannot be executed
because the program product is not
installed or there is no editorial
permission to the user.
10520401022
WCheck the setting(s).The number of LUNs that can be set to
the specified port has exceeded the
maximum.
10520701022
WCheck the setting(s).The specified host cannot be added
because the HBA WWN or the host
name is used in the same port, or, it is
used in the item that has been moved in
the [Selected Host Groups] table.
10520801022
WSet the item that is left blank, then retry
the operation.
The host mode is left blank.10520901022
WSet the item that is left blank, then retry
the operation.
There are blank items in the Host Mode
Options Table.
10521001022
WTo change the setting from Target/RCU
Target to Initiator/External, set only 00
to the host group of the target port, set
the host mode to 00 [Standard], and set
all of the host mode options to Disable.
Other than the Host Mode 00 [Standard]
has been set to the Host Group #00 of
the specified port.
10525201022
WTo change the setting from Target/RCU
Target to Initiator/External, set only 00
to the host group of the target port, set
the host mode to 00 [Standard], and set
all of the host mode options to Disable.
[Enabled] has been set to the Host Mode
Option for the Host Group #00 of the
specified port.
10525301022
WClick [OK], then continue the operation.Some LDEVs or Host Groups that are not
available for LUN path setting are
excluded from the choices.
10527701022
64 Message (part code group 1nnn)

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English