Table 33 Error codes (part code 03022) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the setting(s).The selected LDEV has been set as a
journal volume.
10514103022
WCheck the setting(s).The selected LDEV has been set as a
quorum disk volume.
10514203022
WCheck the setting(s).The selected LDEV has an access
attribute setting.
10514303022
WCheck the setting(s).An LDEV whose emmulation type is
OPEN-L or OPEN-M is selected.
10514403022
WCheck the setting(s).An LDEV for FICON(R) Data Migration
is selected.
10514503022
WExecute refresh, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
The target LDEV is not associated with a
pool.
10514603022
WCheck the setting(s).The target LDEV is blocked.10514703022
WCheck the setting(s).The combo box is not selected.10514803022
EExecute refresh.The processing cannot continue due to
an internal logical contradiction.
10514903022
WSpecify the subject to be operated.Select a table.10515003022
EExecute refresh.The processing cannot continue due to
an internal logical contradiction.
10515103022
ECheck the setting(s).An LDEV in Normal or Quick Formatting
status is selected.
10515203022
WCheck the setting(s).The specified value is outside the range.10515303022
WCheck the setting(s).0 cannot be specified.10515403022
WCheck the setting(s).A value other than the numerical value
is specified.
10515503022
WExecute refresh.The processing cannot continue due to
an internal logical contradiction.
10515603022
WCheck the setting(s).Multiple rows are selected.10515903022
WCheck the setting(s).LDEVs with different emulation types are
selected.
10516003022
WCheck the setting(s).LDEVs with different RAID levels are
selected.
10516103022
WCheck the setting(s).LDEV names cannot be allocated to all
the selected LDEVs with the specified
numerical value of the Initial Number.
10516203022
WCheck the setting(s).Insufficient free space to create LDEV.10516303022
WCheck the setting(s).LDEVs with different emulation types are
selected.
10516403022
WCheck the setting(s).LDEVs with different RAID levels are
selected.
10516503022
90 Message (part code group 3nnn)