Action
Close the drive drawer.
Drive status LED solid amber
Symptom
The drive status LED on the front of the HPE Synergy D3940 Storage Module is solid amber.
Cause
One or more drives have failed.
Action
Check the individual health of the drives and I/O adapter for faults to determine if the storage module is
operating properly. For more information, see the product documentation in the Hewlett Packard
Enterprise Information Library.
Health status LED flashing red
Symptom
The health status LED on the front of the HPE Synergy D3940 Storage Module is flashing red.
Action
Check the individual health of the drives and I/O adapter for faults to determine if the storage module is
operating properly. Further information is available in the HPE Synergy Composer management utility.
Health status LED flashing amber
Symptom
The health status LED on the front of the HPE Synergy D3940 Storage Module is flashing amber.
Action
Check the individual health of the drives and I/O adapter for faults to determine if the storage module is
operating properly. Further information is available in the HPE Synergy Composer management utility.
Drive failure
Symptom
The drive status LED on the front of the HPE Synergy D3940 Storage Module is steadily illuminated
amber, indicating that a drive failure has occurred.
Action
1. Check the individual drive LEDs to determine which drive has failed. The failed drive will have a solid
amber status LED on the failed drive.
Hardware issues 63
To Next Page
Loading...
Need help?
General
