Figure 3-33 Removing a holding rail
2. Push the holding rail out of the square holes. See (3) in Figure 3-33.
3. Remove the front end of the holding rail. See (4) in Figure 3-33.
4. Push the plate into the holding rail. See (5) in Figure 3-33.
5. Remove the rear end of the holding rail.
Lift the positioning pin and remove the holding rail from the square holes. See
(6) and (7) in Figure 3-33.
RH2288H V3 Server
User Guide 3 Installing and Removing the RH2288H V3
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 114
To Next Page
Loading...
