Procedure
● Check indicator status.
Observe the RH2288H V3 indicator status, and check that hardware devices
are properly operating.
For details, see 2.4 Indicators and Buttons.
● Check the RH2288H V3 using the iBMC WebUI.
a. Log in to the iBMC WebUI. For details, see 9.2 Logging In to the iBMC
WebUI.
You are advised to change the default password when you log in to iBMC for the
rst time. For details, see 5.6 Changing an iBMC User Password.
b. View the RH2288H V3 version information.
Choose System > Firmware Upgrade, and view server versions, as shown
in Figure 5-3.
Check that the RH2288H V3 versions meet site requirements.
Figure 5-3 Querying version information
c. View the RH2288H V3 health status and alarms.
Choose Information > Information Summary, and view server health
status, as shown in Figure 5-4.
RH2288H V3 Server
User Guide 5 Conguring the RH2288H V3
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 125
To Next Page
Loading...
