screw holes on the other side of the plate are completely separated from the
network port pins.
3. Ensure that the screw holes and the network port pins do not contact, and
remove the FlexIO card horizontally. See (3) in Figure 7-103.
Figure 7-103 Removing the bae plate from the FlexIO card
Step 12 Place the removed FlexIO card in an ESD bag.
----End
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 241
To Next Page
Loading...
