Step 15 Power on the RH2288H V3. For details, see 4.1 Powering On the Server.
----End
Server with Eight 2.5-inch Hard Disks
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Remove the LCD to be replaced. For details, see 7.47 Removing the LCD.
Step 3 Take the spare LCD out of the ESD bag.
Step 4 Lead the LCD cable through the LCD tray and align the LCD with the slot. See
Figure 7-117.
Figure 7-117 Installing the LCD
Step 5 Push the LCD into the LCD tray in the arrow direction. See Figure 7-118.
Figure 7-118 Pushing the LCD into the LCD tray
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 254
To Next Page
Loading...
