Figure 3-14 Connecting a serial cable
----End
3.4.6 Connecting a Power Cable
Scenarios
Connect a power cable if:
● The RH8100 V3 needs to be powered on after it is properly installed.
● A power supply unit (PSU) is replaced and the new PSU needs to be powered
on.
● A new PSU needs to be powered on after it is properly installed.
The following describes how to connect AC and DC power cables. Connect AC or
DC power cables based on the PSU type.
Prerequisites
Conditions
● The power cable must be securely connected.
● To ensure device and human safety, use the dedicated power cable.
● The power cable is used only for the RH8100 V3. Do not use the power cable
for other devices.
● The RH8100 V3 supports 2000 W and 3000 W AC PSUs.
RH8100 V3 Server
User Guide 3 Installing the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 98
To Next Page
Loading...
