EasyManua.ls Logo

Huawei RH8100 V3 - Installing a Front I;O Module

Huawei RH8100 V3
386 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Step 4 Remove the riser cards, PCIe cards, RAID controller cards, and supercapacitors (or
iBBUs) from the front I/O module, and place the front I/O module in an ESD bag.
For details, see 5.5.5 Removing a Riser Card, 5.5.7 Removing a PCIe Card, 5.5.9
Removing a RAID Controller Card, 5.5.11 Removing an iBBU, and 5.5.13
Removing a Supercapacitor.
----End
5.5.2 Installing a Front I/O Module
This topic describes how to install a front I/O module.
Scenarios
Install a front I/O module if:
The front I/O module has failed.
A riser card on the front I/O module has failed.
A PCIe card on the front I/O module has failed.
A RAID controller card on the front I/O module has failed.
An iBBU on the front I/O module has failed.
A supercapacitor on the front I/O module has failed.
The hard disk backplane on the front I/O module has failed.
Prerequisites
Conditions
You have powered
o the RH8100 V3. For details, see 6.2 Powering O the
RH8100 V3. Then you have removed all power cables from the server.
You have installed PCIe cards on the front I/O module to be installed. For
details, see 5.5.8 Installing a PCIe Card.
You have installed riser cards on the front I/O module to be installed. For
details, see 5.5.6 Installing a Riser Card.
You have installed RAID controller cards on the front I/O module to be
installed. For details, see 5.5.10 Installing a RAID Controller Card.
You have installed iBBUs on the front I/O module to be installed. For details,
see 5.5.12 Installing an iBBU.
You have installed supercapacitors on the front I/O module to be installed. For
details, see 5.5.14 Installing a Supercapacitor.
Data
You have obtained the cabinet number and chassis number of the RH8100 V3.
You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
You have determined the position on the RH8100 V3 for removing the front
I/O module.
Tools
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 151

Table of Contents

Related product manuals