----End
5.2.3 Removing a Memory Board
This topic describes how to remove a memory board.
Scenarios
Remove a memory board if:
● The memory board has failed.
● The memory capacity needs to be expanded.
● A DIMM on the memory board needs to be replaced with a new model.
Prerequisites
Conditions
None
Data
● You have obtained the cabinet number and chassis number of the RH8100 V3.
● You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
● You have determined the position on the RH8100 V3 for removing a memory
board.
Tools
● ESD gloves
● Packaging materials, for example, an ESD bag
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see 1 Safety Instructions.
Step 2
Congure the BIOS and migrate data to another memory board.
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 112
To Next Page
Loading...
