Huawei RH8100 V3 - Changing an Ibmc User Password

6. Check the health status of the server.
Choose Alarm & SEL on the menu bar, choose Current Alarms in the
navigation tree, and check the health status of the server. See Figure 7-6.
Figure 7-6 Checking the health status
7. Clear alarms if any.
For details, see the Huawei Rack Server iBMC Alarm Handling .
If no alarm is generated, skip this step.
7.3 Changing an iBMC User Password
This topic describes how to change an iBMC user password.
Scenarios
Change an iBMC user password for the server.
Impact on the System
This operation has no adverse impact on the system.
Prerequisites
Conditions
You have logged in to the iBMC WebUI over a network port. For details, see 9.2
Logging In to the iBMC WebUI.
Data
Table 7-3 lists the default iBMC user name and password.
Table 7-3 Default iBMC user name and password
Default User
Name and
Password
Description
● User name: root
● Password:
Huawei12#$
This user is the default iBMC user, who belongs to the
administrator group. This user has permission to access all
iBMC resources and perform all operations.
RH8100 V3 Server
User Guide 7 Conguring the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 314