Huawei RH8100 V3 - Configuring RAID

Figure 7-10 Remote desktop
----End
7.5 Conguring RAID
This topic describes how to congure RAID.
The method for conguring RAID varies according to the RAID controller card
model. For details, see the
Huawei V2 and V3 Server RAID Controller Card User
Guide .
There are three methods for identifying the model of a RAID controller card.
Using BIOS Boot Information
● LSISAS2208 controller card
Press <Ctrl><H> for WebBIOS or press <Ctrl><Y> for Preboot CLI is
displayed during system startup, as shown in Figure 7-11.
RH8100 V3 Server
User Guide 7 Conguring the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 318