Step 5 Place the removed RAID controller card in an ESD bag.
----End
5.8.8 Installing a RAID Controller Card
This topic describes how to install a RAID controller card.
Scenarios
Install a RAID controller card if:
● A RAID controller card on the front I/O module has failed.
● A RAID controller card needs to be replaced with a new model.
If the RH8100 V3 is
congured with a RAID controller card, the cable connections
between the RAID controller card and the hard disk backplane are shown in
Figure 5-120.
Figure 5-120 Cable connections (1)
No.
Description BOM Number
1 Signal cable for connecting the hard disk
backplane to the front I/O module
04051340
2 SAS HD cable (Port A-Port A) for connecting
the hard disk backplane to the RAID controller
card
04050905
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 241
To Next Page
Loading...
