Figure 5-26 Installing a cover for a DVD drive+LCD module
----End
5.4 Replacing the Indicator Board and Its Interface
Board
This topic describes how to replace an indicator board and its interface board.
5.4.1 Removing the Indicator Board
This topic describes how to remove the indicator board.
Scenarios
Remove the indicator board if it has failed.
Prerequisites
Conditions
You have powered
o the RH8100 V3. For details, see 6.2 Powering O the
RH8100 V3. Then you have removed all power cables from the server.
Data
● You have obtained the cabinet number and chassis number of the RH8100 V3.
● You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
● You have determined the position on the RH8100 V3 for removing the
indicator board.
Tools
● ESD gloves
● Flat-head screwdriver
● Packaging materials, for example, an ESD bag
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 140
To Next Page
Loading...
