Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see 1 Safety Instructions.
Step 2 When pulling out the mounting ear, use a at-head screwdriver to release the
three latches in holes in the arrow directions. See (1) and (2) in Figure 5-27.
Step 3 Remove the mounting ear in the arrow direction. See (2) in Figure 5-27.
Figure 5-27 Removing a mounting ear
Step 4 Remove the indicator board from the mounting ear. See step (1) in Figure 5-28.
Step 5 Remove the cables from the indicator board. See step (2) in Figure 5-28.
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 141
To Next Page
Loading...
