Huawei RH8100 V3 - Optional) Configuring Hard Partitioning; Switching from the Single-System to the Dual-System

Step 3 Select Yes and press Enter to save the setting.
----End
7.7 (Optional) Conguring Hard Partitioning
This topic describes how to switch between single-system and dual-system.
7.7.1 Switching from the Single-system to the Dual-system
This topic describes how to switch the RH8100 V3 from the single-system to the
dual-system.
Scenarios
Switch the operating mode of the RH8100 V3 from the single-system to the dual-
system.
Impact on the System
After the operating mode is switched from the single-system to the dual-system,
the management IP address of the standby iBMC is restored to 192.168.2.101.
Prerequisites
Conditions
The RH8100 V3 is operating properly.
Data
None
RH8100 V3 Server
User Guide 7 Conguring the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 334