Huawei RH8100 V3 - 9 Common Operations; Querying and Setting the IP Address of the Management Network Port

9 Common Operations
About This Chapter
This topic describes how to perform common operations for the RH8100 V3.
9.1 Querying and Setting the IP Address of the Management Network Port
9.2 Logging In to the iBMC WebUI
9.3 Querying and Changing the Network Port Names of the Internal NIC
9.1 Querying and Setting the IP Address of the
Management Network Port
This topic contains the following content:
● Default IP addresses
● Methods for querying and setting the IP address of the iBMC management
network port in the basic input/output system (BIOS)
● Methods for querying and setting the IP address of the iBMC management
network port on the LCD
Table 9-1 lists the default IP addresses of the iBMC management network ports.
Table 9-1 Default IP addresses
Product Type
Default IP Address
Server in single-system mode 192.168.2.100
System A of the server in dual-
system mode
192.168.2.100
System B of the server in dual-
system mode
192.168.2.101
RH8100 V3 Server
User Guide 9 Common Operations
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 352