● Packaging materials, for example, an ESD bag
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see 1 Safety Instructions.
Step 2 Press the button on the LCD to eject the LCD. See step (1) in Figure 5-21.
Step 3 Press the frame of the LCD in the arrow direction. See step (2) in Figure 5-21.
Step 4 Remove the LCD in the arrow direction. See step (3) in Figure 5-21.
Step 5 Disconnect the cable from the LCD. See step (4) in Figure 5-21.
Figure 5-21 Removing an LCD
Step 6 Place the removed LCD in an ESD bag.
----End
5.3.4 Installing an LCD
This topic describes how to install an LCD.
Scenarios
Install an LCD if the original one has failed.
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 134
To Next Page
Loading...
