Figure 5-20 Installing a DVD drive+LCD module
----End
5.3.3 Removing the LCD
This topic describes how to remove the LCD.
Scenarios
Remove the LCD if it has failed.
Prerequisites
Conditions
You have removed the DVD drive+LCD module from the RH8100 V3. For details,
see 5.3.1 Removing a DVD Drive+LCD Module.
Data
● You have obtained the cabinet number and chassis number of the RH8100 V3.
● You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
● You have determined the position on the RH8100 V3 for removing an LCD.
Tools
● ESD gloves
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 133
To Next Page
Loading...
