Huawei RH8100 V3 - Page 142

Scenarios
Install a DVD drive+LCD module if:
● A DVD drive+LCD module has failed.
● An LCD has failed.
● A DVD drive has failed.
Prerequisites
Conditions
No special conditions are required for this operation.
Data
● You have obtained the cabinet number and chassis number of the RH8100 V3.
● You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
● You have determined the position on the RH8100 V3 for installing a DVD
drive+LCD module.
Tools
● ESD gloves
● Packaging materials, for example, an ESD bag
Hardware
Spare DVD drive+LCD module
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see 1 Safety Instructions.
Step 2 Take the spare DVD drive+LCD module out of the ESD bag, and install an LCD and
DVD drive on the DVD drive+LCD module.
For details, see 5.3.4 Installing an LCD and 5.3.6 Installing a DVD Drive.
Step 3 Insert the DVD drive+LCD module into the chassis as far as it will go. See step (1)
in Figure 5-20.
Step 4 Press the button on the DVD drive+LCD module. See step (2) in Figure 5-20.
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 132