Figure 5-60 Installing a cover for the front I/O module
----End
5.5.15 Removing a Hard Disk Backplane
This topic describes how to remove a hard disk backplane.
Scenarios
Remove a hard disk backplane if it has failed.
Prerequisites
Conditions
● You have powered o the RH8100 V3. For details, see 6.2 Powering O the
RH8100 V3.
● You have removed the front I/O module from the RH8100 V3. For details, see
5.7.1 Removing the Front I/O Module.
Data
● You have obtained the cabinet number and chassis number of the RH8100 V3.
● You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
● You have determined the position on the RH8100 V3 for removing the hard
disk backplane.
Tools
● ESD gloves
● Packaging materials, for example, an ESD bag
● Phillips screwdriver
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 176
To Next Page
Loading...
