Figure 5-8 Installing a CPU protective cover
----End
5.2.6 Installing a CPU
This topic describes how to install a CPU.
● When E7 v2/v3 CPUs are congured, use HFCs whose BOM number is 03022JBN.
● When E7 v4 CPUs are
congured, use HFCs whose BOM number is 03023URP.
● When replacing CPUs of dierent platforms, ensure that new CPUs are compatible with
other components of the server. For details, use the Intelligent Computing
Compatibility Checker.
Scenarios
● Only the personnel authorized by Huawei and Huawei technical support
personnel can install a CPU in Huawei servers.
● Do not wear ESD gloves during CPU replacement. The gloves may catch on pins
on the CPU socket and damage it.
Install a CPU if:
● A CPU has failed.
● A CPU needs to be replaced with a new model.
Prerequisites
Conditions
● You have powered o the RH8100 V3. For details, see 6.2 Powering O the
RH8100 V3. Then you have removed all power cables from the server.
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 120
To Next Page
Loading...
