Step 4 Connect the OT terminal of the negative power cable to the NEG(-) wiring
terminal of the PSU, and connect the OT terminal of the positive power cable to
the RTN(+) wiring terminal of the PSU. Then tighten the screws. See step (1) in
Figure 5-138.
Figure 5-138 Connecting power cables to a DC PSU
Step 5 Install the cover for the PSU, and tighten the screw to secure the cover. See step
(2) in Figure 5-138.
----End
5.10 Replacing an HFC and Its Internal Components
This topic describes how to replace a High-performance Fusion Console (HFC) and
its internal components.
5.10.1 Removing an HFC
This topic describes how to remove a High-performance Fusion Console (HFC).
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 262
To Next Page
Loading...
