Data
● You have obtained the cabinet number and chassis number of the RH8100 V3.
● You have located the RH8100 V3 based on the preceding information, and
labeled its panel to prevent misoperations.
● You have determined the position on the RH8100 V3 for installing a DC PSU.
Tools
● ESD gloves
● Packaging materials, for example, an ESD bag
● Phillips screwdriver
Hardware
Spare DC PSU
Procedure
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see 1 Safety Instructions.
Step 2 Take the spare DC PSU out of its ESD bag.
Step 3 Push the spare DC PSU into a slot (for example, slot 4) along the guide rails until
the PSU clicks into place. See Figure 5-137.
Figure 5-137 Installing a DC PSU
RH8100 V3 Server
User Guide 5 Removing and Installing Parts of the RH8100 V3
Issue 30 (2019-12-19) Copyright © Huawei Technologies Co., Ltd. 261
To Next Page
Loading...
